Heavy Brush Marks
Applying paint might seem like a very easy thing to do, but there are ways to do it wrong and create an unsightly finish, such as heavy brush marks. However, by following the guides set out below, you’ll easily achieve results you’ll be proud of.
How to recognize it
Undesirable ridges/brush marks visible in a dry paint film after brush application.
Causes and how to prevent them
- Paint applied is too thick for brush application.
Prevention: Thin paint a little more or add recommended retarder thinner / brush reducer - Paint is applied in hot weather and does not have time to flow out.
Prevention: Apply with roller and then tip off lightly with brush and/or use recommended thinner/retarder to enhance application characteristics (where required) - Paint has been overworked with brush when applied.
Prevention: When applying by brush lay it on and do not keep going back over it. - Underlying coats not sanded smooth and brush marks are showing through.
Prevention: Ensure underlying paint has been sanded free of all brush marks. - Two pack products used past their stated pot life.
Prevention: Ensure two pack paints are used well before their stated pot life which is the time at which they have reacted out too far to flow correctly.
How to treat it
- Sand surface back to a smooth finish and repaint
Who's painting?
Choose one of the following to tailor the site to your needs
Paint your boat like a pro
Find the best products to keep your boat in great condition
Get all the support you need to paint with confidence
Benefit from our continuous innovation and scientific expertise